Chamber Shaft Seal
|
The shaft seal type KD-8 HD is a labyrinth seal with solid chambers und seal rings which are radially flexibly mounted. It is especially adequate for the application with extremely high medium-pressure. The one-piece seal rings consist of a temperature and pressure resistant titan enclosure with seal carbon insert. The seal rings are suitable for dry running and do not need any lubrication whatsoever. The material of the seal ring is chosen according to the operating conditions. Standard material is T10K.
The shaft seal KD-8 HD is suitable for seal the shaft When in operating condition, the multi-part seal rings made from special carbon do swim on the high turbulent and high-energy gap stream without any direct contact to the shaft. Only with increased radial movements of the shaft, e.g. when passing the critical rotary speed, a short contact between seal ring and shaft may happen. With the help of special constructive measures it was achieved that the radial movement of the seal rings stay in full function even with a differential pressure Δp of 10 bar per seal ring. Consequently, the surface pressure between ring and shaft is minimized. For these reasons, the seal gap between seal ring and shaft can be dimensioned extremely small, always depending on the different thermal expansion coefficient of the seal rings and shaft materials as well as the centrifugal force of shaft sleeves. |
Compared to the rigid and contact-free labyrinth seals, the shaft seal TEDIMA KD-8 HD offers a considerablybetter efficiency especially with supercritical rotors. The leakage values are reduced by up to 90 %. The layout of a seal system of the ‘HD’ series is based on precise as possible details regarding maximum operating conditions and material characteristics. Hence it is necessary to have the completed design data sheet at hand with all necessary details when planning the shaft seal according to customers’ inquiries and orders.
Technical data |
